Tools list

 

Aviation Snips (yellow handle – straight)

Aviation snips are used in applications which include HVAC installation and repair; exterior remodeling industry (roofing, siding, gutter, and down spout installation and repair; metal building construction; RV/motor home/trailer manufacturing; auto body repair; and general sheet metal cutting

 

Calculator (Construction Master Pro)

 

Carpenter’s Pencil

The shape of a carpenter's pencil prevents it from rolling, even when placed on a steep sloping roof. The most popular shape seems to be a flat, octagonal style. And the lead must be strong enough to make a heavy mark and to withstand the stresses of carpentry, which frequently requires marking on very coarse surfaces. The leads are usually wide and flat.

Chalk Line (Blue and Red)-
A chalk line or chalk box is a tool for marking long, straight lines on relatively flat surfaces, much farther than is practical by hand or with a strightedge.
It is an important tool in constraction and carpentry, the working of timber in a rough and unplaned state, as it does not require the timber to have a straight or squared edge formed onto it beforehand.

Ear Protection (reusable ear plugs)-Earmuffs are objects designed to cover a person's ears for protection. They consist of a thermoplastic or metal head-band, that fits over the top of the head, and a pad at each end, to cover the external ears.

Hammer-A hammer is a tool meant to deliver an impact to an object. The most common uses are for driving nails, fitting parts, forging metal and breaking up objects.

Hardhat – OSHA approved-A hard hat is a type of helmet predominantly used in workplace environments, such as construction sites, to protect the head from injury by falling objects, impact with other objects, debris, bad weather and electric shock.

(Ratchet-type head band recommended)

 

Safety Glasses-Safety glasses are usually made with shatter-resistant plastic lenses to protect the eye from flying debris.

Sliding T-bevel-
A sliding T bevel is an adjustable gauge for setting and transferring angles. The handle is usually made of wood or plastic and is connected to a metal blade with a thumbscrew or wing nut. The blade pivots and can be locked at any angle by loosening or tightening the thumbscrew.

In use

The bevel can be used to duplicate an existing angle, or set to a desired angle by using it with any number of other measuring tools

Carpentry

Tool List